Descripción
Descripción
Amplificador mono compacto para subwoofer KPX500.1 de 1x500W
El amplificador mono KPX500.1 está diseñado específicamente para quienes necesitan gran potencia con un tamaño reducido. Haga que su moto suene potente sin sobrecargar su sistema de carga.
El amplificador para subwoofer KPX500.1 cuenta con un crossover de paso bajo variable de 24dB/octava y un filtro subsónico variable de 24dB/octava para proteger sus subwoofers y definir su sonido con precisión. Su amplia gama de niveles de entrada permite que este amplificador se conecte fácilmente a prácticamente cualquier radio de fábrica o del mercado de accesorios. Para controlar los bajos sobre la marcha, conecte el mando a distancia opcional CXARC.
Si tiene dos amplificadores mono o subwoofers activos, eche un vistazo al mando a distancia DBRC para controlar ambos desde el mismo mando. Este amplificador KPX500.1 ofrece hasta 500 vatios en un solo canal.
Características:
- Tamaño extremadamente compacto
- Amplificador dedicado para subwoofer
- Hasta más de 500 vatios de potencia
- Cabe bajo los carenados de las motocicletas
- Diseño resistente a la intemperie
- Controles de crossover integrados
- Compatible con el control remoto de bajos CXARC
Specifications
Specifications
Identification
| MPN | 51KPX5001 |
|---|
Dimensions
| Dimensions (H x W x D) | 1.69" x 8.54" x 3.62" (43 x 217 x 92 mm) |
|---|---|
| Weight | - |
Amplifier
| Amplifier Class | Class D |
|---|---|
| Channels | 1 |
Amplifier Power
| Rated Continuous (RMS) Power (14.4 V input @ 4 Ohm < 1% THD) | 150 W x 1 |
|---|---|
| Rated Continuous (RMS) Power (14.4 V input @ 2 Ohm < 1% THD) | 300 W x 1 |
| Rated Continuous (RMS) Power (14.4 V input @ 1 Ohm < 1% THD) | 500 W x 1 |
| Rated Continuous (RMS) Power (12.5 V input @ 4 Ohm < 1% THD) | - |
| Rated Continuous (RMS) Power (12.5 V input @ 2 Ohm < 1% THD) | - |
Amplifier Processing
| Signal-to-Noise Ratio, referred to highest rated power (A-weighted, 20 Hz-20 kHz noise bandwidth): Analog inputs | > 90 dB |
|---|---|
| Signal-to-Noise Ratio, referred to 1 W (A-weighted, 20 Hz-20 kHz noise bandwidth): Analog inputs | - |
| Signal-to-Noise Ratio (Manufacturer Rating) | - |
| Damping Factor @ 4 Ω | - |
| Damping Factor @ 2 Ω | - |
| THD+N @ rated power | - |
| Frequency Response (+0, -1dB) | 10 Hz-160 Hz |
| Input Voltage Range @ RCA Inputs | 125 mV-5 V (low level); 1 V-40 V (high level) |
| Input Impedance | - |
| Remote Level Control | Optional (CXARC, sold separately) |
| Remote Level Modes | - |
| Channel Input Mode Switch | - |
| Pass-through Preamp Output | - |
| Source Channel Selection for PreOuts | - |
Amplifier Filters
| Bass Boost EQ | 0 or +6 dB @ 40 Hz (selectable) |
|---|---|
| Output Polarity Switch | - |
| Filter Mode(s): Subwoofer Channel | Low-Pass |
| Filter Slope(s): Subwoofer Channel | 24 dB/octave |
| Filter Frequency Range: Subwoofer Channel | 40 Hz-160 Hz |
| High-Pass/Low-Pass Full Range Filter | - |
| HP Variable Crossover Frequency Range | - |
| LP Variable Crossover Frequency Range | - |
| Infrasonic Filter | 10 Hz-40 Hz, 24 dB/octave |
| Detented, Calibrated Filter Potentiometers | - |
Electrical
| Operating Voltage | 6-16 VDC |
|---|---|
| Current Consumption (idle) | - |
| Current Consumption (standby) | - |
| Fuse Rating | 60 A (external) |
| Recommended Fuse Type(s) | - |
| Minimum Copper Power/Ground Wire Gauge | 8 AWG |
General
| Water/Dust Protection Rating | - |
|---|---|
| Operating Temperature Range | - |
| Protection Circuits | - |
Warranty/Certifications
| Certifications | - |
|---|---|
| Warranty | - |
Reseñas (0)
Reseñas (0)
In The Box
In The Box
In The Box:
Package Dimensions:
Available Shipping Methods:
Support
Support
* ALL WARRANTY IS THROUGH MANUFACTURE *
