Discontinued
Fusion | SKU:
FUS/010-01499-00
Amplificador marino de 2 canales Fusion MS-AM402 - 400W
Precio normal
$22999
Total:
Precio unitario
Los gastos de envío se calcularán al momento de pagar.
Fusion | SKU:
FUS/010-01499-00
Precio normal
$22999
Total:
Precio unitario
Los gastos de envío se calcularán al momento de pagar.
Descripción
Descripción
Amplificador marino de 2 canales MS-AM402 - 400 W
Características:
- Chasis de grado marino: Las tapas de los extremos y la placa inferior de acero inoxidable proporcionan un acabado impresionante con una mayor protección ambiental.
- Tecnología de disipador térmico: La tecnología de disipador térmico transfiere el calor de manera más eficiente y ofrece mayor estabilidad térmica para lograr la máxima fiabilidad de los componentes.
- Diseño de clase AB: El diseño de 400 vatios estable a 2 ohmios (por canal) garantiza una amplificación limpia y potente de la señal de entrada, suficiente para hacer vibrar la embarcación.
- Circuitos con revestimiento conformado: Proporcionan protección adicional contra el aire salino y la humedad para garantizar la máxima vida útil del producto.
- Salida de línea RCA: Una salida RCA de paso permite conectar varios amplificadores para mejorar el rendimiento del sistema.
Specifications
Specifications
Identification
| MPN | 010-01499-00 |
|---|---|
| Barcode | 753759139247 |
Dimensions
| Dimensions (H x W x D) | 2.09" x 11.65" x 9.02" (53 x 296 x 229 mm) |
|---|---|
| Weight | - |
Amplifier
| Amplifier Class | Class D |
|---|---|
| Channels | 2 |
Amplifier Power
| Rated Continuous (RMS) Power (14.4 V input @ 4 Ohm < 1% THD) | 65 W x 2/200 W x 1 (Bridged) |
|---|---|
| Rated Continuous (RMS) Power (14.4 V input @ 2 Ohm < 1% THD) | 100 W x 2 |
Amplifier Processing
| Signal-to-Noise Ratio, referred to highest rated power (A-weighted, 20 Hz-20 kHz noise bandwidth): Analog inputs | - |
|---|---|
| Signal-to-Noise Ratio, referred to 1 W (A-weighted, 20 Hz-20 kHz noise bandwidth): Analog inputs | - |
| Signal-to-Noise Ratio (Manufacturer Rating) | > 95 dB |
| Damping Factor @ 4 Ω | > 200 |
| Damping Factor @ 2 Ω | - |
| THD+N @ rated power | 0.05% |
| Frequency Response (+0, -1dB) | - |
| Input Voltage Range @ RCA Inputs | 300 mV-8 V |
| Input Impedance | 20 kΩ |
| Remote Level Control | - |
| Remote Level Modes | - |
| Channel Input Mode Switch | - |
| Pass-through Preamp Output | - |
| Source Channel Selection for PreOuts | - |
Amplifier Filters
| Bass Boost EQ | 0 to +18 dB @ 45 Hz |
|---|---|
| Output Polarity Switch | - |
| Filter Mode(s): Channels 1 & 2 | Low-Pass or High-Pass |
| Filter Slope(s): Channels 1 & 2 | Low-Pass: 18 dB/octave; High-Pass: 12 dB/octave |
| Filter Frequency Range: Channels 1 & 2 | Low-Pass: 40 Hz-160 Hz; High-Pass: 40 Hz-600 Hz |
| High-Pass/Low-Pass Full Range Filter | - |
| HP Variable Crossover Frequency Range | - |
| LP Variable Crossover Frequency Range | - |
| Infrasonic Filter | 20 Hz-55 Hz, 18 dB/octave |
| Detented, Calibrated Filter Potentiometers | - |
Electrical
| Operating Voltage | 10-16 VDC |
|---|---|
| Current Consumption (idle) | - |
| Current Consumption (standby) | - |
| Fuse Rating | 1 x 25 A |
| Recommended Fuse Type(s) | - |
| Minimum Copper Power/Ground Wire Gauge | 4 AWG |
General
| Water/Dust Protection Rating | - |
|---|---|
| Operating Temperature Range | - |
| Protection Circuits | - |
Warranty/Certifications
| Certifications | - |
|---|---|
| Warranty | - |
Reseñas (0)
Reseñas (0)
In The Box
In The Box
In The Box:
Package Dimensions:
Support
Support
* ALL WARRANTY IS THROUGH MANUFACTURE *







WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to