Cargando...
SKU:
JEN/JAHD240BT
Precio normal
$12995
Total:
Precio unitario
Descripción
Descripción
Amplificador Bluetooth de 2 canales JAHD240BT - 80W
El modelo resistente al agua JAHD240BT se encuentra a la vanguardia de la tecnología con tecnología Bluetooth integrada, lo que permite a los usuarios transmitir su contenido de audio mediante un dispositivo con Bluetooth. Ahora, los usuarios pueden llevar su biblioteca de música personal consigo en todas sus aventuras.
Todas las opciones de reproducción y volumen se controlan desde el dispositivo con Bluetooth del usuario.
Características:
- Resistente al agua (IPX6)
- Indicador de alimentación LED rojo
- Carcasa encapsulada con epoxi
- Resistente a la corrosión (ASTM B117)
Specifications
Specifications
Identification
| MPN | JAHD240BT |
|---|---|
| Barcode | 681787019579 |
Dimensions
| Dimensions (H x W x D) | 2.32" x 4.13" x 1.47" (59 x 105 x 37 mm) |
|---|---|
| Weight | 1.00 lbs (0.45 kg) |
Amplifier
| Amplifier Class | Class D |
|---|---|
| Channels | 2 |
Amplifier Power
| Rated Continuous (RMS) Power (Manufacturer Rating @ 4 Ohm) | 20 W x 2 |
|---|
Amplifier Processing
| Signal-to-Noise Ratio, referred to highest rated power (A-weighted, 20 Hz-20 kHz noise bandwidth): Analog inputs | - |
|---|---|
| Signal-to-Noise Ratio, referred to 1 W (A-weighted, 20 Hz-20 kHz noise bandwidth): Analog inputs | - |
| Signal-to-Noise Ratio (Manufacturer Rating) | > 95 dB |
| Damping Factor @ 4 Ω | - |
| Damping Factor @ 2 Ω | - |
| THD+N @ rated power | 0.5% |
| Frequency Response (+0, -1dB) | 20 Hz-20 kHz |
| Input Voltage Range @ RCA Inputs | - |
| Input Impedance | - |
| Remote Level Control | - |
| Remote Level Modes | - |
| Channel Input Mode Switch | - |
| Pass-through Preamp Output | - |
| Source Channel Selection for PreOuts | - |
Amplifier Filters
| Bass Boost EQ | - |
|---|---|
| Output Polarity Switch | - |
| Filter Mode(s): Channels 1 & 2 | - |
| Filter Slope(s): Channels 1 & 2 | - |
| Filter Frequency Range: Channels 1 & 2 | - |
| High-Pass/Low-Pass Full Range Filter | - |
| HP Variable Crossover Frequency Range | - |
| LP Variable Crossover Frequency Range | - |
| Infrasonic Filter | - |
| Detented, Calibrated Filter Potentiometers | - |
Electrical
| Operating Voltage | 10-16 VDC |
|---|---|
| Current Consumption (idle) | 2.5 A (nominal) |
| Current Consumption (standby) | 1 mA |
| Fuse Rating | 10 A (waterproof holder) |
| Recommended Fuse Type(s) | - |
| Minimum Copper Power/Ground Wire Gauge | - |
General
| Water/Dust Protection Rating | IPX6 |
|---|---|
| Operating Temperature Range | -30 °C to 45 °C |
| Protection Circuits | - |
Warranty/Certifications
| Certifications | ASTM B117 (corrosion resistance) |
|---|---|
| Warranty | - |
Reseñas (0)
Reseñas (0)
In The Box
In The Box
In The Box:
Package Dimensions:
Available Shipping Methods:
Support
Support
* ALL WARRANTY IS THROUGH MANUFACTURE *
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to 