Cargando...
Amplificador KICKER de 4 canales de rango completo de 4 x 100W con ...
Precio de venta
$77999
Precio normal
$87999
Total:
Precio unitario
SKU:
KIC/48PXA10005
Precio de venta
$77999
Precio normal
$87999
Total:
Precio unitario
Descripción
Descripción
Amplificador de 4 canales de rango completo de 4 x 100 W con canal para subwoofer de 600 W
Completamente rediseñado, ¡el PXA1000.5 es una solución de un solo amplificador para todo el sistema! Ofrece una gran potencia de rango completo, en un diseño compacto e impermeable para las instalaciones más complicadas.
Características:
- Diseño de amplificador impermeable con certificaciones IP66 e IP67
- Ideal para UTV, vehículos todoterreno, hot rods o vehículos con espacio limitado
- Tecnología Clase D de alta eficiencia
- Enorme potencia de rango completo en un tamaño reducido: ¡clasificado en 1400 vatios de potencia dinámica!
- Incluye un canal para subwoofer estable a un ohmio
- Modos de encendido dual (elección de compensación de CC o activación de 12 V)
- Incluye acopladores de alimentación y tierra en línea que no requieren soldadura ni crimpado
- Herrajes de montaje de acero inoxidable incluidos
Specifications
Specifications
Identification
| MPN | 48PXA10005 |
|---|---|
| Barcode | 713034088455 |
Dimensions
| Dimensions (H x W x D) | 1.97" x 12.91" x 4.53" (50 x 328 x 115 mm) |
|---|---|
| Weight | - |
Amplifier
| Amplifier Class | Class D |
|---|---|
| Channels | 5 |
Amplifier Power
| Rated Continuous (RMS) Power (14.4 V input @ 4 Ohm < 1% THD) | Main: 100 W x 4/200 W x 2 (Bridged)/Sub: 300 W x 1 |
|---|---|
| Rated Continuous (RMS) Power (14.4 V input @ 2 Ohm < 1% THD) | Main: 100 W x 4/Sub: 500 W x 1 |
| Rated Continuous (RMS) Power (14.4 V input @ 1 Ohm < 1% THD) | Sub: 600 W x 1 |
| Rated Continuous (RMS) Power (12.5 V input @ 4 Ohm < 1% THD) | - |
| Rated Continuous (RMS) Power (12.5 V input @ 2 Ohm < 1% THD) | - |
Amplifier Processing
| Signal-to-Noise Ratio, referred to highest rated power (A-weighted, 20 Hz-20 kHz noise bandwidth): Analog inputs | - |
|---|---|
| Signal-to-Noise Ratio, referred to 1 W (A-weighted, 20 Hz-20 kHz noise bandwidth): Analog inputs | - |
| Signal-to-Noise Ratio (Manufacturer Rating) | - |
| Damping Factor @ 4 Ω | - |
| Damping Factor @ 2 Ω | - |
| THD+N @ rated power | - |
| Frequency Response (+0, -1dB) | Channels 1-4: 10 Hz-20 kHz; Subwoofer: 25 Hz-200 Hz |
| Input Voltage Range @ RCA Inputs | 125 mV-5 V (low level); 1 V-40 V (high level) |
| Input Impedance | - |
| Remote Level Control | - |
| Remote Level Modes | - |
| Channel Input Mode Switch | - |
| Pass-through Preamp Output | - |
| Source Channel Selection for PreOuts | - |
Amplifier Filters
| Bass Boost EQ | 0 to +6 dB @ 40 Hz |
|---|---|
| Output Polarity Switch | - |
| Filter Mode(s): Channels 1 & 2 | High-Pass |
| Filter Slope(s): Channels 1 & 2 | 24 dB/octave |
| Filter Frequency Range: Channels 1 & 2 | 80 Hz or 120 Hz |
| Filter Mode(s): Channels 3 & 4 | High-Pass |
| Filter Slope(s): Channels 3 & 4 | 24 dB/octave |
| Filter Frequency Range: Channels 3 & 4 | 80 Hz or 120 Hz |
| Filter Mode(s): Subwoofer Channel | Low-Pass |
| Filter Slope(s): Subwoofer Channel | 24 dB/octave |
| Filter Frequency Range: Subwoofer Channel | 60 Hz, 80 Hz, 100 Hz or 120 Hz |
| High-Pass/Low-Pass Full Range Filter | - |
| HP Variable Crossover Frequency Range | - |
| LP Variable Crossover Frequency Range | - |
| Infrasonic Filter | - |
| Detented, Calibrated Filter Potentiometers | - |
Electrical
| Operating Voltage | 10-16 VDC |
|---|---|
| Current Consumption (idle) | - |
| Current Consumption (standby) | - |
| Fuse Rating | 150 A (external) |
| Recommended Fuse Type(s) | - |
| Minimum Copper Power/Ground Wire Gauge | 1/0 AWG |
General
| Water/Dust Protection Rating | - |
|---|---|
| Operating Temperature Range | - |
| Protection Circuits | - |
Warranty/Certifications
| Certifications | - |
|---|---|
| Warranty | - |
Reseñas (0)
Reseñas (0)
In The Box
In The Box
In The Box:
Package Dimensions:
Available Shipping Methods:
Support
Support
* ALL WARRANTY IS THROUGH MANUFACTURE *
