Fusion Apollo™ Marine Zone Amplifier - 140W

Name: Fusion Apollo™ Marine Zone Amplifier - 140W
Brand: Fusion
SKU: FUS/010-02569-00
Price: 199.99 USD
Availability: InStock

SKU: FUS/010-02569-00

$199⁹⁹

Same-Day Shipping Checking cutoff…

Description

Apollo™ Marine Zone Amplifier - 140W

Amplify the moment with an Apollo™ marine amplifier – designed specifically for use with your Fusion DSP-enabled marine stereo and Fusion speakers.

This efficient zone amplifier provides audio zone expansion for high-quality sound in more areas on your boat. With 20-watt RMS per channel (at 4 ohms), this 2 channel amplifier allows you to add an extra pair of speakers on board. The Easy Tune feature automatically regulates audio settings for the best sound quality without manual adjustments (Requires setup using the Fusion-Link™ app on a compatible smartphone).

Fusion Apollo AP-DA214

Features:

Efficient Class-D Design - Uses less power, so you can listen to music for longer at higher volumes, with less drain on the battery.
Easy Tune Feature - Automatically adjusts audio settings for the best possible sound quality with no manual adjustments required (Requires setup using the Fusion-Link app on a compatible smartphone).
Compact Design - The compact size of the zone amplifier makes it a versatile option for mounting on board.
Ignition Protected - Intelligent electronic fuse prevents damage from over/under current, temperature, output short, and other faults.
Conformal Coated PCBs - The amplifier circuit board has been specially coated to provide enhanced protection from the marine elements.
12- and 24-Volt Compatible - The zone amplifier is designed to work with both 12- and 24-volt electrical systems.
True-Marine™ Design - Designed to withstand the harshest marine environments season after season, the zone amplifier is IPX7 rated and comes with a 3-year warranty.

Specifications

Identification

MPN	010-02569-00
Barcode	753759269753

Dimensions

Dimensions (H x W x D)	1.57" x 3.94" x 3.94" (40 x 100 x 100 mm)
Weight	1.01 lbs (460 g)

Amplifier

Amplifier Class	Class D
Channels	2

Amplifier Power

Rated Continuous (RMS) Power (14.4 V input @ 4 Ohm < 1% THD)	20 W x 2
Rated Continuous (RMS) Power (14.4 V input @ 2 Ohm < 1% THD)	30 W x 2
Rated Continuous (RMS) Power (12.5 V input @ 4 Ohm < 1% THD)	-
Rated Continuous (RMS) Power (12.5 V input @ 2 Ohm < 1% THD)	-

Amplifier Processing

Signal-to-Noise Ratio, referred to highest rated power (A-weighted, 20 Hz-20 kHz noise bandwidth): Analog inputs	-
Signal-to-Noise Ratio, referred to 1 W (A-weighted, 20 Hz-20 kHz noise bandwidth): Analog inputs	-
Signal-to-Noise Ratio (Manufacturer Rating)	-
Damping Factor @ 4 Ω	-
Damping Factor @ 2 Ω	-
THD+N @ rated power	-
Frequency Response (+0, -1dB)	20 Hz-20 kHz
Input Voltage Range @ RCA Inputs	0.45 V RMS
Input Impedance	9 kΩ
Remote Level Control	-
Remote Level Modes	-
Channel Input Mode Switch	-
Pass-through Preamp Output	-
Source Channel Selection for PreOuts	-

Amplifier Filters

Bass Boost EQ	None
Output Polarity Switch	-
Filter Mode(s): Channels 1 & 2	-
Filter Slope(s): Channels 1 & 2	-
Filter Frequency Range: Channels 1 & 2	-
High-Pass/Low-Pass Full Range Filter	-
HP Variable Crossover Frequency Range	-
LP Variable Crossover Frequency Range	-
Infrasonic Filter	-
Detented, Calibrated Filter Potentiometers	-

Electrical

Operating Voltage	-
Current Consumption (idle)	< 0.04 A @ 14.4 V input
Current Consumption (standby)	< 1 mA @ 14.4 V input
Fuse Rating	16 A electronic fuse (no replacement necessary)
Recommended Fuse Type(s)	-
Minimum Copper Power/Ground Wire Gauge	-

General

Water/Dust Protection Rating	IPX7
Operating Temperature Range	32° to 122° F (0° to 50° C)
Protection Circuits	-

Warranty/Certifications

Certifications	-
Warranty	3 Years

Reviews (1)

In The Box

In The Box:

One Apollo zone amplifier
One mounting bracket
Three 6-gauge, self-tapping screws
Wiring loom
Installation instructions
Important safety and product information (ISPI)

Package Dimensions:

6" x 6" x 3"

Available Shipping Methods: