Loading...
JBL MA Series Monoblock Subwoofer Amplifier - MA600AM
Sale price
$32995
Regular price
$41995
Total:
Unit price
SKU:
JBL/JBLMA600AM
Sale price
$32995
Regular price
$41995
Total:
Unit price
Description
Description
The JBL marine A600 mono subwoofer amplifier delivers 600-Watts RMS using a Class D amplifier design to ensure high output and minimum current draw. Speaker-level inputs allow this amplifier to integrate into almost any system, even one using your marine's factory radio. You can use the low-pass filter and variable bass boost to maximize the performance of your subwoofer and enclosure, while a phase switch ensures that the bass will blend well with your full-range speakers.
- Compact size
- High and low level input
- Variable crossover and bass boost
- Low noise and distortion
- Input Level Control
- Full on-board protection
- Phase Switch
- RBC wired remote
- Class D amp technology
- Turn-on mode
Specifications
Specifications
Identification
| MPN | JBLMA600AM |
|---|
Dimensions
| Dimensions (H x W x D) | 2.02" x 8.66" x 7.09" (51 x 220 x 180 mm) |
|---|---|
| Weight | - |
Amplifier
| Amplifier Class | Class D |
|---|---|
| Channels | 1 |
Amplifier Power
| Rated Continuous (RMS) Power (14.4 V input @ 4 Ohm < 1% THD) | 350 W x 1 |
|---|---|
| Rated Continuous (RMS) Power (14.4 V input @ 2 Ohm < 1% THD) | 600 W x 1 |
Amplifier Processing
| Signal-to-Noise Ratio, referred to highest rated power (A-weighted, 20 Hz-20 kHz noise bandwidth): Analog inputs | - |
|---|---|
| Signal-to-Noise Ratio, referred to 1 W (A-weighted, 20 Hz-20 kHz noise bandwidth): Analog inputs | - |
| Signal-to-Noise Ratio (Manufacturer Rating) | - |
| Damping Factor @ 4 Ω | - |
| Damping Factor @ 2 Ω | - |
| THD+N @ rated power | - |
| Frequency Response (+0, -1dB) | - |
| Input Voltage Range @ RCA Inputs | 200 mV-4 V (line level); 1 V-22 V (high level) |
| Input Impedance | - |
| Remote Level Control | Included (RBC wired remote) |
| Remote Level Modes | - |
| Channel Input Mode Switch | - |
| Pass-through Preamp Output | - |
| Source Channel Selection for PreOuts | - |
Amplifier Filters
| Bass Boost EQ | 0 to +12 dB @ 45 Hz |
|---|---|
| Output Polarity Switch | Yes (0°/180°) |
| Filter Mode(s): Subwoofer Channel | Low-Pass |
| Filter Slope(s): Subwoofer Channel | 12 dB/octave |
| Filter Frequency Range: Subwoofer Channel | 32 Hz-320 Hz |
| High-Pass/Low-Pass Full Range Filter | - |
| HP Variable Crossover Frequency Range | - |
| LP Variable Crossover Frequency Range | - |
| Infrasonic Filter | - |
| Detented, Calibrated Filter Potentiometers | - |
Electrical
| Operating Voltage | - |
|---|---|
| Current Consumption (idle) | - |
| Current Consumption (standby) | - |
| Fuse Rating | 2 x 30 A |
| Recommended Fuse Type(s) | - |
| Minimum Copper Power/Ground Wire Gauge | 8 AWG |
General
| Water/Dust Protection Rating | - |
|---|---|
| Operating Temperature Range | Up to 45 °C (maximum) |
| Protection Circuits | Short circuit, over-temperature, overvoltage, undervoltage |
Warranty/Certifications
| Certifications | - |
|---|---|
| Warranty | - |
Reviews (0)
Reviews (0)
In The Box
In The Box
In The Box:
Package Dimensions:
Available Shipping Methods:
Support
Support
Warranty
* ALL WARRANTY IS THROUGH MANUFACTURE *
